Animated loader dots14ComingSoonAnimated loader dots
Welder

Maxx® Gases​

Improved productivity, fewer rejects and a better working environment

Whatever you are welding, Air Products’ innovative Maxx® gases range will give you superior results. Formulated to boost output through a unique combination of weldability, weld quality and higher welding speeds, you will achieve improved productivity with fewer rejects.

Our Maxx® gases range is also designed to protect people at work, by generating the lowest levels of ozone and fume.

Extensively tested by Air Products’ own specialists, by its customers and by independent accredited laboratories, including TWI (formerly The Welding Institute, UK), this range has been proven to improve performance.

Introducing the Maxx® Gases

ap0080-cylindersand-pack
Ferromaxx® – For faster, cleaner welding of carbon steel

Purpose designed for MAG welding carbon, carbon manganese and low alloy steels, the Ferromax® gases give superb weld quality and excellent penetration together with minimal spatter and low fume levels.

Find out more
ap0052-various-size-cyinders
Inomaxx® – Maximum performance for welding stainless steel

The Inomaxx® range of gases has been developed to give high quality welds in stainless steel which have excellent surface finish and superb corrosion resistance.

Find out more
ap0053-move-cylinders
Alumaxx® – One gas that does it all for aluminium

Alumaxx® Plus weld process gas has been specifically designed as the only gas that you need for the high quality welding of aluminium.

Find out more

Offerings

Find your optimal welding gas

Looking for a welding gas to drive both productivity and profit as well as ensuring weld quality? Use our easy gas selector tool. Alternatively, for general enquiries or to receive a quote for larger volumes call us on 0800 3890202 or fill in the contact form here.

Find your optimal welding gas

Our best gas

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We also recommend

Alumaxx Plus Integra

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

also suitable

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

used in certain applications

Alumaxx Plus Standard

M31ArC50

A weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our best gas

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We also recommend

Alumaxx Plus Integra

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Alumaxx Plus Integra

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Integra

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

A weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Alumaxx Plus Integra

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

A weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Alumaxx Plus Integra

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Alumaxx Plus Integra

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Integra

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

A weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Also Suitable

Alumaxx Plus Integra

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Also Suitable

Alumaxx Plus Integra

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

A weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Our best gas

Also Suitable

Alumaxx Plus Integra

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Alumaxx Plus Standard

I3ArHe30

I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

used in certain applications

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Backing Gas - Our Best Gas

Backing Gas-Also Suitable

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe30

I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our best gas

Also Suitable

Alumaxx Plus Integra

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Backing Gas

Alumaxx Plus Integra

Inomaxx® TIG

Inomaxx® TIG (R1ArH2) weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

Also Suitable

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Alumaxx Plus Standard

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Alumaxx Plus Standard

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

used in certain applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

A weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our best gas

Alumaxx Plus Standard

Inomaxx® Plus

Inomaxx® Plus (M12ArHeC35/2) weld process gas meeting the requirements of ISO14175:M12, contains 35% Helium and 2% Carbon Dioxide in Argon. Our best gas for stainless steel welding all material thicknesses on dip, spray and pulse transfer. Stable arc conditions offer all-positional capability.

We also recommend

Alumaxx Plus Standard

Inomaxx® 2

Inomaxx® 2 (M12ArC2) weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Our ideal all-rounder for MAG welding stainless steel is highly suited to pulsed arc transfer, offering superior weld properties. For welding thin and medium thickness Ferritic and Austenitic stainless steel in dip, spray and pulse transfer modes.

also suitable

Alumaxx Plus Standard

M12HeArC23.5/1.5

A weld process gas meeting the requirements of ISO14175:M12, contains 23.5% Argon and 1.5% Carbon Dioxide in Helium. Suited for MAG welding of stainless steels.

Used in Certain Applications

Backing Gas - Also Suitable

Alumaxx Plus Standard

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our best gas

Alumaxx Plus Integra

Inomaxx® Plus

Inomaxx® Plus (M12ArHeC35/2) weld process gas meeting the requirements of ISO14175:M12, contains 35% Helium and 2% Carbon Dioxide in Argon. Our best gas for stainless steel welding all material thicknesses on dip, spray and pulse transfer. Stable arc conditions offer all-positional capability.

We also recommend

Alumaxx Plus Integra

Inomaxx® 2

Inomaxx® 2 (M12ArC2) weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Our ideal all-rounder for MAG welding stainless steel is highly suited to pulsed arc transfer, offering superior weld properties. For welding thin and medium thickness Ferritic and Austenitic stainless steel in dip, spray and pulse transfer modes.

Backing Gas

Our best gas

Alumaxx Plus Standard

Inomaxx® Plus

Inomaxx® Plus (M12ArHeC35/2) weld process gas meeting the requirements of ISO14175:M12, contains 35% Helium and 2% Carbon Dioxide in Argon. Our best gas for stainless steel welding all material thicknesses on dip, spray and pulse transfer. Stable arc conditions offer all-positional capability.

We also recommend

Alumaxx Plus Standard

Inomaxx® 2

Inomaxx® 2 (M12ArC2) weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Our ideal all-rounder for MAG welding stainless steel is highly suited to pulsed arc transfer, offering superior weld properties. For welding thin and medium thickness Ferritic and Austenitic stainless steel in dip, spray and pulse transfer modes.

also suitable

Alumaxx Plus Standard

M12HeArC23.5/1.5

A weld process gas meeting the requirements of ISO14175:M12, contains 23.5% Argon and 1.5% Carbon Dioxide in Helium. Suited for MAG welding of stainless steels.

Used in Certain Applications

Backing Gas - Also Suitable

Alumaxx Plus Standard

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our best gas

Alumaxx Plus Integra

Inomaxx® Plus

Inomaxx® Plus (M12ArHeC35/2) weld process gas meeting the requirements of ISO14175:M12, contains 35% Helium and 2% Carbon Dioxide in Argon. Our best gas for stainless steel welding all material thicknesses on dip, spray and pulse transfer. Stable arc conditions offer all-positional capability.

We also recommend

Alumaxx Plus Integra

Inomaxx® 2

Inomaxx® 2 (M12ArC2) weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Our ideal all-rounder for MAG welding stainless steel is highly suited to pulsed arc transfer, offering superior weld properties. For welding thin and medium thickness Ferritic and Austenitic stainless steel in dip, spray and pulse transfer modes.

Backing Gas

Our best gas

Alumaxx Plus Standard

Inomaxx® Plus

Inomaxx® Plus (M12ArHeC35/2) weld process gas meeting the requirements of ISO14175:M12, contains 35% Helium and 2% Carbon Dioxide in Argon. Our best gas for stainless steel welding all material thicknesses on dip, spray and pulse transfer. Stable arc conditions offer all-positional capability.

We also recommend

Alumaxx Plus Standard

Inomaxx® 2

Inomaxx® 2 (M12ArC2) weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Our ideal all-rounder for MAG welding stainless steel is highly suited to pulsed arc transfer, offering superior weld properties. For welding thin and medium thickness Ferritic and Austenitic stainless steel in dip, spray and pulse transfer modes.

also suitable

Alumaxx Plus Standard

M12HeArC23.5/1.5

A weld process gas meeting the requirements of ISO14175:M12, contains 23.5% Argon and 1.5% Carbon Dioxide in Helium. Suited for MAG welding of stainless steels.

Used in Certain Applications

Backing Gas - Also Suitable

Alumaxx Plus Standard

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our best gas

Alumaxx Plus Integra

Inomaxx® Plus

Inomaxx® Plus (M12ArHeC35/2) weld process gas meeting the requirements of ISO14175:M12, contains 35% Helium and 2% Carbon Dioxide in Argon. Our best gas for stainless steel welding all material thicknesses on dip, spray and pulse transfer. Stable arc conditions offer all-positional capability.

We also recommend

Alumaxx Plus Integra

Inomaxx® 2

Inomaxx® 2 (M12ArC2) weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Our ideal all-rounder for MAG welding stainless steel is highly suited to pulsed arc transfer, offering superior weld properties. For welding thin and medium thickness Ferritic and Austenitic stainless steel in dip, spray and pulse transfer modes.

Backing Gas

Our best gas

Alumaxx Plus Integra

Inomaxx® TIG

Inomaxx® TIG (R1ArH2) weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

We also recommend

Alumaxx Plus Standard

I3ArHe30

I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

also suitable

Alumaxx Plus Integra

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Backing Gas - Our Best Gas

Backing Gas - Also Suitable

Alumaxx Plus Integra

Inomaxx® TIG

Inomaxx® TIG (R1ArH2) weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our best gas

Alumaxx Plus Integra

Inomaxx® TIG

Inomaxx® TIG (R1ArH2) weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

We also recommend

Backing Gas

Alumaxx Plus Integra

Inomaxx® TIG

Inomaxx® TIG (R1ArH2) weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

Our best gas

Alumaxx Plus Integra

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

We also recommend

Alumaxx Plus Integra

Argon

Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminium and other reactive materials.